If you aren't familiar with Green Style Creations patterns you should check them out. I have no affiliation with them, though I would happily pattern test for them if they asked me to she says as she bats her eyes. Green Style's patterns go XXS to 3XL and then some of their patterns also go from 1X to 3X in addition to that. The raglan tee that I made went to a full on 3X which is different sizing than the 3XL. I know that it is a little confusing, but they do offer a broad range of sizes on some of their patterns. I am hoping that if some more of us Curvy Divas start sewing and blogging about their patterns they will continue to grade up to 3X. It is a very generous 3X BTW. I am normally a 3X size 24 to 26 in RTW, and their 3X was flat out too big for me. That is good news for us curvier gals though who generally have the exact opposite issue.
Back to the Laurel Tunic. This pattern goes up to a 3XL (the smaller of the X sizing). Based on how large the the raglan tee was, I decided to give it a try and cut it in the 3XL that is supposed to fit a 46 to 47 inch full bust. For full disclosure I am 5'6", and my measurements are as follows:
HB- 47 inches
FB- 52 inches
W- 50 inches (this includes my current steroid bloat)
H- 64 inches
It appears to be pulling at the armscye across the bust, but it really wasn't. I just forgot to pull it down, and didn't even look in the mirror after putting the shirt on. Per my usual I left the sleeves a little long to account for further shrinkage. I cut the knee length dress, but knew that it would be perfect tunic length for me. I ended up serging about 7/8 of an inch off the length, but that was it. A curvy girl's body takes up more length than her less curvy counterparts!
I really like it and this pattern is for sure a keeper. My hubby is just gonzo over this shirt and wants me to make it in every color imaginable. It will be perfect paired with leggings or jeggings and tall black boots.
Now for the fiddly bits...
As mentioned earlier I cut the 3XL in this shirt. I followed most of the pattern directions except I serged the pleats instead of basting them on my regular machine, and I ironed the pleats in prior to serging. For the back of the tunic you have the choice of cutting a smaller piece and having a flat seam at the bodice or cutting it the same as the front and putting pleats in the back as well. I opted to cut the piece to be pleated, because I needed the extra inches for hip space. If you had a smaller waist to hip ratio you could easily cut the straight piece instead. Next time I make this I may gather the center back instead of pleating it, just for a change in design element.
The pattern directions call for set in sleeves, but I decided to sew them flat, because that is just my preferred method. My order of sewing was 1. Sew shoulder seams, 2. Serge pleats, 3. Serge pleated bottom of shirt to bodice, 4. Serge sleeves in the flat, 5. Serge side seams from hem bottom to sleeve cuff edge 6. Serge raw edges of hem and sleeves, 7. Serge in the cowl neck, and 8. Twin needle the hem and cuffs. It was pretty straight forward and went together in less than an hour.
Would I recommend this pattern to a friend? Absolutely. It went together like a dream.
Will I be making this pattern again? Certainly. I see this getting a lot of wear over the cooler months and there are many colors that I need this in. It has all the comfort of a snuggly t-shirt but with a much more sophisticated profile.
Have any of you made this pattern? If so what were your results?
Two last bits of business...Thank you so much to everyone who has been voting for me on the CSC Wrapalong. It is going well, and at this moment I am very hopeful that I might be one of the top dresses, but there are still 3 agonizing days of voting left, and a lot can change in three days.
Also, Thank you to everyone for all the well wishes. I wound up back at the doc today and I now have pneumonia...or walking pneumonia. Funny thing is I feel better now than I did back when I only had bronchitis, but the steroids and breathing treatments are making me swell and bloat like a dead carp! Oy! Point is, I am actually feeling better, and Thank You all so very much for your well wishes!
Back to the Laurel Tunic. This pattern goes up to a 3XL (the smaller of the X sizing). Based on how large the the raglan tee was, I decided to give it a try and cut it in the 3XL that is supposed to fit a 46 to 47 inch full bust. For full disclosure I am 5'6", and my measurements are as follows:
HB- 47 inches
FB- 52 inches
W- 50 inches (this includes my current steroid bloat)
H- 64 inches
Here is the finished product!
 |
| Yes, I apologize for no makeup. |
 |
| And the greasy Granny hair! |
It appears to be pulling at the armscye across the bust, but it really wasn't. I just forgot to pull it down, and didn't even look in the mirror after putting the shirt on. Per my usual I left the sleeves a little long to account for further shrinkage. I cut the knee length dress, but knew that it would be perfect tunic length for me. I ended up serging about 7/8 of an inch off the length, but that was it. A curvy girl's body takes up more length than her less curvy counterparts!
I really like it and this pattern is for sure a keeper. My hubby is just gonzo over this shirt and wants me to make it in every color imaginable. It will be perfect paired with leggings or jeggings and tall black boots.
Now for the fiddly bits...
As mentioned earlier I cut the 3XL in this shirt. I followed most of the pattern directions except I serged the pleats instead of basting them on my regular machine, and I ironed the pleats in prior to serging. For the back of the tunic you have the choice of cutting a smaller piece and having a flat seam at the bodice or cutting it the same as the front and putting pleats in the back as well. I opted to cut the piece to be pleated, because I needed the extra inches for hip space. If you had a smaller waist to hip ratio you could easily cut the straight piece instead. Next time I make this I may gather the center back instead of pleating it, just for a change in design element.
The pattern directions call for set in sleeves, but I decided to sew them flat, because that is just my preferred method. My order of sewing was 1. Sew shoulder seams, 2. Serge pleats, 3. Serge pleated bottom of shirt to bodice, 4. Serge sleeves in the flat, 5. Serge side seams from hem bottom to sleeve cuff edge 6. Serge raw edges of hem and sleeves, 7. Serge in the cowl neck, and 8. Twin needle the hem and cuffs. It was pretty straight forward and went together in less than an hour.
Would I recommend this pattern to a friend? Absolutely. It went together like a dream.
Will I be making this pattern again? Certainly. I see this getting a lot of wear over the cooler months and there are many colors that I need this in. It has all the comfort of a snuggly t-shirt but with a much more sophisticated profile.
Have any of you made this pattern? If so what were your results?
Two last bits of business...Thank you so much to everyone who has been voting for me on the CSC Wrapalong. It is going well, and at this moment I am very hopeful that I might be one of the top dresses, but there are still 3 agonizing days of voting left, and a lot can change in three days.
Also, Thank you to everyone for all the well wishes. I wound up back at the doc today and I now have pneumonia...or walking pneumonia. Funny thing is I feel better now than I did back when I only had bronchitis, but the steroids and breathing treatments are making me swell and bloat like a dead carp! Oy! Point is, I am actually feeling better, and Thank You all so very much for your well wishes!
